Monthly Archives: May 2016

Some Tips to Fix Squeaky Floors

unduhan-33The squeaks and creaks that you hear, every time someone walks by, can drive you crazy. But don’t worry. It is possible to get rid of this annoying sound. Although completely eliminating the source of this noise can be a difficult job, there are several simple methods that require a minimal investment in buying the necessary equipment.

Fixing Squeaky Floors

The key to getting rid of squeaky floors, is to identify the root cause of the noise, and to get rid of it permanently. There can be several reasons that can cause this. Over a period of time, the wood dries out and shrinks, generating small gaps between the hardwood boards. These gaps are a common cause of the problem. Most wooden-flooring options in modern houses are made up of several layers of wood. The lowest layer, known as the floor joist, can also cause squeaking due to sagging, over time. The nature of the sound, as well as the method used to fix the floor, depends on which layer is responsible for the noise and what type of finishing the floor has.

Fix the Floors from Underneath
The first and the most important thing to do is to locate the exact source of the noise. For those of you who have floorboards that are not placed over concrete, you can ask someone to walk across the floor, while you examine the floor joists from below. Look for any movement that could indicate a loose joist or gap in between. If you find either, you can fix it, using the options given below:

Things Required:

  • Construction adhesive
  • Wooden shims
  • Wooden screws
  • Hammer
  • Flooring nails


  • If you find a gap between the layers, it is simple to deal with. Apply construction adhesive on a tapered shim and carefully tap it into the gap. Do not force it inside, as it may widen the gap and worsen its condition.
  • If the floorboards are warped or the bracing is loose, you may have to re-attach it, using wooden screws. Be careful not to tighten the screws so hard, that they strip the wood.
  • Another option would be to install an extra bracing between the floor joints. Make sure to screw the bracing firmly into the subfloor.

Fix the Floors from Above
In case you find it difficult to get to the underside of the floor, as it may be situated on the second story or there may be a finished ceiling below the squeaky floor, you can work on it from the top, too. These are some simple techniques on how to fix these floors from above the ground.

Things Required:

  • Powdered graphite or talcum powder
  • Paper towels
  • Flooring nails
  • Small screws


  • An easy option would be to sprinkle some talcum powder or graphite, along the seams of the boards. Cover the powder with a cloth or the paper towels, and step on the floorboards to let the powder seep into the seam. The powder coats the surface of the boards and stops them from rubbing against each other. This method works well for small cracks or gaps.
  • If the floor is still squeaky, you will have to nail the floorboard into the subfloor. You could also use small screws to join the boards together, as they hold better than ordinary nails. Do not forget to patch the holes with a wood filler.

Way to Apply Epoxy Paint to Garage Floor

unduhan-32In recent times, the popularity of epoxy paint coating for garage floor has increased manifold, and it can be attributed to its many good points and the fact that it comes in a variety of colors that you can choose from. The durability of epoxy paints has always been talked about and another factor that works in its favor is the fact that it does not allow oily or greasy particles to attach to its surface which makes the paint easier to clean, and thus, ranks it higher than several other types of paints. There are three different types of epoxy paints that are available in the market; water based epoxy, solvent based epoxy, and solid epoxy. The most popular type of epoxy paint for garage flooring in the market are solvent based paints.

Applying Epoxy Paint to Garage Floor

Solvent epoxy paints have an adhesive quality and it penetrates the flooring of the garage easily. But while using this type of paint, it is important that you use proper protective gear, as the fumes of the solvents are extremely harmful. It is also important that after you paint the garage, you leave it ventilated, so that there is no build up of fumes in the garage. Now that you know what precautions need to be taken before taking up a project like this, in the next section we tell you, exactly what steps you need to follow to paint the floor of the garage. In order to apply paint on a garage floor, you will need a paint kit, paint brush, primer, stir stick, metal putty knife, and a pressure washer.

  • First and foremost, it is important that you clean the floor completely to remove the dust and dirt completely. Use the pressure washer to do this. You will also need to remove any paint on the flooring. In order to do this you will need to use a metal putty knife so that any peeling paint can be removed.
  • Allow the floor to dry after you clean it. Next check the floor for any cracks. In order to get a smooth floor, you will need to patch all the cracks. You can use an epoxy crack filler to do this. Ensure that the surface level is smooth and that you allow it to dry for at least four hours before putting on the primer.
  • Before you start applying the paint, you will need apply a primer to the floor. Ensure that you paint in the direction that is along the wood grain and that you smooth out the primer completely. Also ensure that you allow it to dry for two hours before applying the primer.
  • Now start applying the paint. You will first need to mix in the two components of the paint. Use the stir stick to mix it up completely. Once you are sure that the paint is mixed in completely, you can start the process of applying the paint.
  • Before painting the area of the flooring, it may be a good idea to first paint the perimeter of the garage. To ensure that you do not get paint on the walls or the door of the garage, it may be a good idea to use a duct tape to cover it up so that you can get paint till the edges. Once you have painted the sides, you can start painting the rest of the floor. Once you have painted the floor completely, ensure that you do not let anyone enter the garage till you have finished it completely.
  • Allow the first coat of paint to dry overnight or at least for 16 hours before applying the second coat. Also it may be a good idea to add a coating additive to the second coat which allows for non-skid flooring.
  • Allow the coat to dry for another sixteen hours and you can start parking your cars in the garage after a week. It may be a good idea to apply a coat of floor wax if you want a flooring that can be cleaned easily.

Learning to apply epoxy paint is extremely easy. If you have spilled paint on the walls you can use an epoxy thinner to remove the same. Painting the floor of your garage is an easy project that can be easily done over the weekend.

Lay Tiles Options

unduhan-34Many people call professionals for laying tiles on the flooring in their house–but their services are usually very expensive. It is because of this that many people prefer to do this job personally, but without proper instructions and directions, one might end up making a mess of it. To avoid all this, it is important that proper instructions and steps are provided–which is exactly what this following article will do. Continue reading for some tips on how to lay tiles, how to prevent the common mistakes that may arise, and the ways in which you can save money while doing the same.

Decide The Size and Color
The first thing that you have to do is decide on the size of the tile as well as the area that you want to cover with the tiles. The tiles come in various shapes and sizes. Pick one of your choice and make sure that all the tiles are of the same size. Get some extra tiles to be on the safe side because some might break while laying them. In fact, while laying the tiles diagonally, many tiles are wasted as cutoffs. Also, decide on the color of the tile. Choose something that will complement the rest of the room. This is important because once you fix the tiles, it will be a tedious job taking them off again, and will be a wastage of money, time, and energy.

Clean the Floor
Next, make sure that the floor on which you will lay the tiles, is even and clean. If not, then level it properly. Also, if there are any cracks on the floor, repair them or else there might be a problem after you have laid the tiles. Remove any traces of oil and debris.

Make a rough eye estimation as to how the tiles should be laid, and what the flooring should be like. This will prevent the wastage of tiles, and will also save some time. Using a marker, you can also draw an outline of the tiles and the way it is to be laid in order to further help you.

Make the Mortar
Make the mortar which you will use in order to place the tiles in their proper position. If you want, you can also use an adhesive to stick the tiles. Using a trowel, put some of the mortar at the back of the tile and place it in its correct place. Make sure that there is no gap between the tile and the floor, or else the pressure might break the tile. Many times, the tile might be laid in a crooked manner–in such a situation, remove the tile immediately, clean it off the mortar and place it in the correct manner again. Once the mortar has dried and set in, it is very difficult to change anything. Similarly, if the mortar rubs off on the surface of the tiles, it needs to be cleaned immediately.

Using Adhesive
Some people, instead of using mortar, make use of adhesives for laying tiles on concrete. Choose an adhesive that is strong enough to hold the tiles. Do not dot the tiles only in the four corners while sticking, this will not stick firmly to the ground, and that will increase the chances of the tile cracking. For best results, use a trowel to apply the adhesive evenly across the entire tile and then press it firmly on the ground.

Mixing the Grout
Once the tiles have been laid, mix the grout. Carefully fill in the spaces between the tiles with the grout, and wipe the extra grout off. As it dries up, wipe the tiles with a wet cloth. Don’t be surprised if the tiles look a bit hazy. That’s because of the excess grout. Clean it, and the tiles will lose the hazy look.